![]()
Again, if you have another choice editor, feel free to use it. There really isn’t anything to do with nfs-kernel-server but we do need to do a little configuration on tftp-hpa. RASPBERRY PI TFTP SERVER INSTALLsudo apt install tftpd-hpa nfs-kernel-server -y I will also be installing “nfs-kernel-server” which will be taking care of the NFS that we will be utilizing. As far as I have seen, they are both basically the same setup though. I tried tftpd but couldn’t get it to work. I personally use the host name of each system. Again, you will need to make a folder for each operating system but it can be anything you want, as long as it is unique. The /pisystem will hold all of the rest of the files. ![]() RASPBERRY PI TFTP SERVER SERIALWe will eventually need to make multiple folders in this directory that is specific to each Raspberry Pis serial number. piboot will be used to host the boot system files for each Raspberry Pi. I recommend putting whatever you use on the root system because if you put them in a system folder such as /mnt, you may have problems down the road. In my example, I will be using “/piboot” and “/pisystem”. Next, create the folders that will be used to store the boot files and the system files for each Raspberry Pi. RASPBERRY PI TFTP SERVER UPDATEWhen the operating system is install, run the following commands to make sure it has the latest packages: sudo apt update & sudo apt upgrade -y & sudo apt dist-upgrade -y This system should be able to stay on 24/7. ![]() It should work for other Linux based operating systems as well. You can use Raspberry Pi OS for this as well. I am using a Ubuntu Server VM on my Unraid server as my TFTP server in this case. These are statically assigned in OPNsense and will be different in your setup. ![]() Throughout the guide, you will see me using the IP address “192.168.35.252” as the server and “192.168.35.101” as my Raspberry Pi IP address. RASPBERRY PI TFTP SERVER HOW TOHow to do this is beyond the scope of this guide but if there is interest, I will make a guide on how to do this. After making the golden image, I will then copy it to set up Moonlight on a Pi that will be netbooted.įor OPNsense, I will be using VLAN 35 which I have set up specifically for PXE booting Raspberry Pis. I am making a ‘golden image’ of Raspberry Pi OS for my example. Realistically, you can use another Raspberry Pi with an external drive hooked up, or I have also seen instructions on how to set up a Synology NAS to work. I am running it in a VM on my Unraid server. I chose to use Ubuntu Server to run the TFTP/PXE server.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |